CONSUMER I.C.

We design our solutions for certain consumer applications by using microcontrollers. They are ready for your mass production.

AX4100   NEW
Ni-Cd/Ni-MH Rapid-Charge Management IC

• Detect impaired or improper chemistry-type battery cells
• External programmable rapid-charge current by resistors.
• Suitable for Power Tools, Cordless Appliances, Mobile devices,
  Personal Health Care devices.
• 8-pin PDIP / SSOP / TSSOP

size 98.9KB

size 1.03MB

NDV1250AP

• Charger I.C. for five NiCD/NiMH cells in series.
• Designed for Camcorders, Cellular Phones and handheld tools.
• Low cost

n/a

size 187KB

AX328

• Charger I.C. for SPN4435A compatible desktop charger.
• Support dual batteries phone at the front dock and main or auxiliary batteries at the rear dock simultaneously.

n/a

n/a

AX400

• Charger I.C. for single Li+ cell.
• External programmable final voltage by resistor.
• Suitable for Cellular Phones.
• Low cost

n/a

size 170KB

   Data sheets are provided for reference only.  They are subjected to change without prior notice.

PCB ASSEMBLY UNIT

We design our own solution build some PC Board Assembly Units as a ready solution for local OEM manufacturers. PC Board Assembly Unit is a subassembly of a finished goods. It is formed by a piece of printed circuit board soldered with components, functional tested and features with dedicated functions.

Safety Unit for single cell Li-ion Battery Pack

• support 4.25V or 4.35V cutoff voltage
• max. continuous load current up to 3.5 Amp
• short circuit protection
• on-board 50 kΩ NTC temperature sensor
• suitable for GSM/PCS/PHS portable phones use
• SMD design

n/a

n/a

Capacity Gauge for 6V Ni-CD/Ni-MH Camcorder Battery Pack

• drive LCD display at Static or dynamic 1/2 bias
• activate by push-button
• automatic shutdown in few seconds
• SMD design

n/a

n/a

C120 Desktop Charger Board

• support dual ports (phone prior to spare battery pack)
• support main and auxiliary batteries attached to phone
• can read DS2502 chip to determine charger parameters

• for both 3.6V NiMH and Li+ battery pack
• support SPN4373A and SPN4278 power adapter
• three bicolor LEDs display panel
• compatible with SPN4435A and SPN4520
• SMD design

n/a

n/a

C260 Desktop Charger Board

• support dual ports (phone prior to spare battery pack)
• two bicolor LEDs display charger status
• for 4.8V NiMH battery pack
• onboard discharge function by push button
• compatible with MC6000
• Through-hole design

n/a

n/a

C270 Desktop Charger Board

• support dual ports (phone prior to spare battery pack)
• for 4.8V NiMH battery and onboard discharge
• dual bicolor LEDs display charger status
• compatible with MC7000
• SMD design

n/a

n/a

C360 Desktop Charger Board

• support dual ports (phone prior to spare battery pack)
• for both 3.6V NiMH and Li+ battery pack
• single bicolor LED shows charger status
• compatible with DCH-9
• SMD design

n/a

n/a

    Data sheets are provided for reference only.  They are subjected to change without prior notice.